Tersa knives are high quality products manufactured in Switzerland. Tersa Blades are suitable for Tersa systems in jointers, planers, thicknessers, automatic molders, etc. The Tersa Planer Knives are two sided and are used on each side before they are recycled. They are ultra-light and don't need sharpening. You simply use one side of the blades until they dull, flip the blades around, use the other side until dull, and recycle the blades after. Because of their unique design Tersa Knives can be removed and replaced in seconds. Used with the Tersa Planer Head, knives are clamped by centrifugal force and gibb wedges, leaving no screws to deal with. A consistent cutter head diameter and knife height also eliminates the need for height adjustment on your blades. CHROME Chrome Steel is the least costly Tersa knife. Chrome knives have a very sharp cutting edge with a 50° relief angle. Chrome knives can be used for the same wood materials as HSS knives, however, chrome steel knives will be work faster. Therefore chrome knives are recommended for soft woods only, such as Balsa, Poplar, Nordic Pine, etc. HSS High Speed Steel (HSS) knives are the best knives for all round purposes. The knives have a very sharp cutting edge with a 50° relief angle. HSS knives are more durable than chrome knives and make a better finish than solid carbide knives. HSS is recommended for wood materials like Pine, Oak, Maple, Cherry, etc. Tersa HSS knives can be sharpened. M42 M42 (HSS) knives are the best knives for tough applications where the regular HSS knives are not sufficient. The M42 knives have a cutting edge geometry similar to carbide and are less likely to chip the cutting edge than regular HSS knives. M42 knives are more durable than HSS knives and make a better finish than solid carbide knives. M42 is recommended for wood materials like Pine, Oak, Maple, Cherry, etc. Tersa M42 knives can be sharpened. Solid Carbide Solid Carbide knives are the most durable. Solid carbide knives do not have the same sharp edge as chrome steel and HSS knives and since solid carbide is more brittle, the relief angle is reduced to 35°. However, the hardness and wear resistance makes the carbide knife perfect for machining hard woods such as Teak, Hickory, etc. Carbide knives are also used for laminated woods with weather resistant glue and woods that are covered with sand and dirt. Tersa solid carbide knives can be sharpened.
Minimax CU 410E Tersa Full Combo Machine 8.5' Slider
Freight included in price* Next available July 2024, The Minimax CU 410ES T has unbeatable performances and technology for the craftsmen or
SCM Minimax CU 410ES - Tersa Full Combination Machine - 10.5' Slider
SCM Nova F 410 - Tersa 16 Jointer
All — Page 3 — WSI Machinery
Check out this SCM minimax cu 410e Combination Machine (1-Phase) 6.5HP/8.5' Slide at 360 Degree Machinery LLC !
SCM minimax cu 410e Combination Machine (1-Phase) 6.5HP/8.5' Slide » 360 Degree Machinery LLC
SCM minimax fs 41e 16 Jointer Planer (1-phase) » 360 Degree
SCM Minimax CU 410ES Tersa Combination Machine - Manufacturing
Check out this SCM minimax cu 410e Combination Machine (1-Phase) 6.5HP/8.5' Slide at 360 Degree Machinery LLC !
SCM minimax cu 410e Combination Machine (1-Phase) 6.5HP/8.5' Slide » 360 Degree Machinery LLC
Woodworking Universal Combination Machine Minimax CU 410ES - SCM